# 2019-07-02-openshift origin 3.11 在线安装

采用单节点模式，在centos7.4安装openshift3.11社区版，环境需联网。 若离线安装，提前拉好源和镜像。

官方文档 [https://docs.okd.io/3.11/install/host\_preparation.html](https://docs.okd.io/3.11/install/host_preparation.html)

## 配置环境

### 1. 系统配置

操作系统： centos 7.4 mini install，最小化安装 虚机配置： 2核 8G 网卡配置IP netmask gateway dns

### 2. 设置主机名及配置ssh免密

```bash
# 设置主机名
hostnamectl set-hostname origin311.localpd.com

# /etc/hosts 增加一行，把IP换成自己虚机的
172.16.160.13 origin311.localpd.com

# 配置ssh免密
ssh-keygen   # 一路敲回车
ssh-copy-id origin311.localpd.com # 输入密码
ssh origin311.localpd.com hostname -i # 验证免密
```

### 3. 更新yum源及设置selinux

注意此处不要用官方的epel源，那个ansible是2.8.0的，按照官方文档，ansible版本需不低于2.5.7，不支持2.8.0，此处自己添加ansible源，安装2.7.4

```bash
# 添加ansible 源
cat > /etc/yum.repos.d/ansible.repo << EOF
[ansible]
name=ansible
baseurl=https://releases.ansible.com/ansible/rpm/release/epel-7-x86_64/
enabled=0
gpgcheck=0
EOF

# 安装 ansible
yum -y --enablerepo=ansible install ansible-2.7.4

# 安装其他需要的包及更新
yum install pyOpenSSL wget git net-tools bind-utils yum-utils iptables-services bridge-utils bash-completion kexec-tools sos psacct java-1.8.0-openjdk-headless python-passlib  -y

yum update -y

# 安装并启动docker 
yum install docker-1.13.1 -y
systemctl enable docker
systemctl start docker
systemctl is-active docker

# 修改selinux 
setenforce 0

# 关闭防火墙和设置selinux 为permissive
systemctl disable firewalld;
systemctl stop firewalld;

# /etc/selinux/config  把SELINUX=enforcing 改为 SELINUX=permissive
sed -i -e "s/^SELINUX=enforcing/SELINUX=permissive/" /etc/selinux/config

reboot  # 必须做
```

## docker安装配置

### 1. docker 安装

yum install docker-1.13.1

Verify that version 1.13 was installed:

```bash
rpm -V docker-1.13.1
docker version
```

### 2. docker 独立存储配置，需要独立sdb磁盘，POC和测试环境忽略这步

停止docker服务

```bash
systemctl stop docker
rm -rf /var/lib/docker/
```

配置/etc/sysconfig/docker-storage-setup

```bash
cat <<EOF > /etc/sysconfig/docker-storage-setup
STORAGE_DRIVER=overlay2
DEVS=/dev/sdb
CONTAINER_ROOT_LV_NAME=dockerlv
CONTAINER_ROOT_LV_SIZE=100%FREE
# 下面这个mount的路径就比较特殊了，其实这个相关的配置文件就是使用sdb创建一个pv、vg、lv，然后格式化成xfs，最后mount一下，docker只是去使用这个路径下空间，如果docker存储的路径需要改变，这个mount的路径也需要进行修改。
CONTAINER_ROOT_LV_MOUNT_PATH=/var/lib/docker
VG=docker-vg
EOF
```

初始化docker存储启动docker

```bash
docker-storage-setup
systemctl start docker
```

最后通过docker info去查看存储相关的配置进行验证

注意点 如果此前这块盘被使用过，创建了pv，vg，lv，需依次删除lv、vg、pv，然后再使用fdisk删除sdb1分区，执行partprobe，最后再执行docker-storage-setup。 如果pv删了，vg删不掉，重启下系统。 在使用一块盘、分区、VG，lv默认使用的是所在VG的40%空间，这个要看具体 执行docker-storage-setup报错如下错误时，将WIPE\_SIGNATURES=true追加至/etc/sysconfig/docker-storage-setup文件后。

ERROR: Found dos signature on device /dev/sdb at offset 0x1fe. Wipe signatures using wipefs or use WIPE\_SIGNATURES=true and retry.

如果再次执行docker-storage-setup还会报如下错，删除/etc/sysconfig/docker-storage文件再次执行即可。

docker-storage-setup

### 3. 启动docker服务

```bash
 systemctl enable docker
 systemctl start docker
 systemctl is-active docker
```

修改docker配置 /etc/sysconfig/docker 替换之前的OPTIONS

```bash
cp /etc/sysconfig/docker /etc/sysconfig/docker.bak.$(date "+%Y%m%d%H%M%S");
sed  -i s/".*OPTIONS=.*"/"OPTIONS='--log-driver=json-file --insecure-registry=172.30.0.0\/16 --insecure-registry=registry.ocp311origin.com:5000 --selinux-enabled --log-opt max-size=1M --log-opt max-file=3'"/g /etc/sysconfig/docker;

##Restart the Docker service:
systemctl restart docker
```

## openshift安装

### 1. 下载ansible 脚本

```bash
cd ~
git clone https://github.com/openshift/openshift-ansible
cd openshift-ansible
git checkout release-3.11

# 也可以手动去网站下载release-3.11的分支
```

### 2. 准备ansible hosts文件

```bash
# 在openshift-ansible 目录
# 新建文件 inventory/hosts 内容如下

[root@origin311 openshift-ansible-release-3.11]# cat inventory/hosts
# Create an OSEv3 group that contains the masters, nodes, and etcd groups
[OSEv3:children]
masters
nodes
etcd

# Set variables common for all OSEv3 hosts
[OSEv3:vars]
# SSH user, this user should allow ssh based auth without requiring a password
ansible_ssh_user=root

# If ansible_ssh_user is not root, ansible_become must be set to true
#ansible_become=true

openshift_deployment_type=origin   #代表开源版

# 指定安裝的 OpenShift 版本
openshift_release="3.11"
openshift_image_tag=v3.11.0
openshift_pkg_version=-3.11.0
openshift_use_openshift_sdn=true

os_sdn_network_plugin_name='redhat/openshift-ovs-networkpolicy'
# When installing osm_cluster_network_cidr and openshift_portal_net must be set.
# Sane examples are provided below.
#osm_cluster_network_cidr=10.128.0.0/14
#openshift_portal_net=172.30.0.0/16

# disable checks unsupported
 openshift_disable_check=docker_storage,memory_availability,docker_image_availability,disk_availability,docker_storage_driver

# uncomment the following to enable htpasswd authentication; defaults to AllowAllPasswordIdentityProvider
openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider'}]
# Defining htpasswd users
#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'}

# default subdomain to use for exposed routes, you should have wildcard dns
# for *.apps.test.example.com that points at your infra nodes which will run
# your router
openshift_master_default_subdomain=apps.localpd.com

#Set cluster_hostname to point at your load balancer
#将来平台的访问域名
openshift_master_cluster_method=native
openshift_master_cluster_hostname=origin311.localpd.com
openshift_master_cluster_public_hostname=origin311.localpd.com

# Cluster metrics are not set to automatically deploy.
# The metrics public URL can be set during cluster installation using
# the openshift_metrics_hawkular_hostname Ansible variable, which defaults to:
# https://hawkular-metrics.{{openshift_master_default_subdomain}}/hawkular/metrics
openshift_metrics_install_metrics=true

ansible_service_broker_install=false
openshift_enable_service_catalog=false
template_service_broker_install=false
openshift_logging_install_logging=false
enable_excluders=false

# registry passwd
#oreg_url=registry.ocp311origin.com:5000/openshift3/ose-${component}:${version}
#oreg_url=registry.ocp311origin.com:5000/openshift/origin-${component}:${version}
openshift_examples_modify_imagestreams=true

# Enable cockpit
osm_use_cockpit=true
#
# Set cockpit plugins
osm_cockpit_plugins=['cockpit-kubernetes']

# docker config
#openshift_docker_additional_registries=registry.ocp311origin.com:5000
openshift_docker_insecure_registries=registry.ocp311origin.com:5000
#openshift_docker_blocked_registries
openshift_docker_options="--insecure-registry 172.30.0.0/16 --log-driver json-file --log-opt max-size=1M --log-opt max-file=3"

# OpenShift Router Options
# Router selector (optional)
# Router will only be created if nodes matching this label are present.
# Default value: 'node-role.kubernetes.io/infra=true'
#openshift_hosted_router_selector='node-role.kubernetes.io/infra=true'
#
# Router replicas (optional)
# Unless specified, openshift-ansible will calculate the replica count
# based on the number of nodes matching the openshift router selector.
#openshift_hosted_router_replicas=2

# Openshift Registry Options
# Registry selector (optional)
# Registry will only be created if nodes matching this label are present.
# Default value: 'node-role.kubernetes.io/infra=true'
#openshift_hosted_registry_selector='node-role.kubernetes.io/infra=true'
#
# Registry replicas (optional)
# Unless specified, openshift-ansible will calculate the replica count
# based on the number of nodes matching the openshift registry selector.
#openshift_hosted_registry_replicas=2


# openshift_cluster_monitoring_operator_install=false
# openshift_metrics_install_metrics=true
# openshift_enable_unsupported_configurations=True
#openshift_logging_es_nodeselector='node-role.kubernetes.io/infra: "true"'
#openshift_logging_kibana_nodeselector='node-role.kubernetes.io/infra: "true"'


# host group for masters
[masters]
origin311.localpd.com

# host group for etcd
[etcd]
origin311.localpd.com

# host group for nodes, includes region info
[nodes]
origin311.localpd.com openshift_node_group_name='node-config-all-in-one'
```

### 3. 执行安装脚本

```bash
# 使用ansible脚本预检查
ansible-playbook -i inventory/hosts playbooks/prerequisites.yml

# 执行完成会在每台节点添加openshift在线源，此源下载比较慢。若使用离线源，可以手动替换。 /etc/yum.repos.d/CentOS-OpenShift-Origin311.repo

# 执行部署脚本
ansible-playbook -i inventory/hosts playbooks/deploy_cluster.yml

# 卸载脚本，如果执行出错或者想要重新部署可以执行卸载脚本
正常情况下不要执行
### ansible-playbook -i inventory/hosts playbooks/adhoc/uninstall.yml ###
```

确认部署结果

```bash
oc get node 
oc get pod --all-namespaces

// 设置密码，用户名密码都是 admin
htpasswd -b /etc/origin/master/htpasswd admin admin;   #这个命令每个master节点都要做
oc adm policy add-cluster-role-to-user cluster-admin admin;   #master1 执行即可

// 如果有其他用户，多次执行，再通过oc admin赋权
htpasswd -b /etc/origin/master/htpasswd <usre_name> <user_passwd>
```

### 4. 部署FAQ，异常处理

1. 部署报错 Install docker excluder - yum

TASK \[openshift\_excluder : Install docker excluder - yum] fatal: \[node2.ocp311origin.com]: FAILED! => {"attempts": 3, "changed": false, "msg": "Failure talking to yum: 'ascii' codec can't encode characters in position 173-177: ordinal not in range(128)"}

这个报错，是因为脚本部署过程修改了/etc/resolv.conf 中nameserver，改成了本地IP，而dnsmasq未正常启动，不能访问外部域名，nameserver 被改成本地IP，这个是正常的，只要dnsmasq服务正常，就没有问题，之前的dns配置文件被移到了 /etc/dnsmasq.d/origin-upstream-dns.conf 查看dnsmasq服务发现报错信息，手动启动dnsmasq起不来，和dbus有关，可能是部署过程更新了dbus导致异常。

解决方法：重启dbus，然后重启dnsmasq并查看dnsmasq状态，还不行就重启操作系统。

1. 部署报错 Wait for control plane pods to appear

TASK \[openshift\_control\_plane : Wait for control plane pods to appear] _**\*\***_ Wednesday 29 May 2019 16:09:27 +0800 (0:00:00.098) 0:06:23.053 **\*** FAILED - RETRYING: Wait for control plane pods to appear (60 retries left).

ansible版本问题，2.8.0 版本会卡在这地方，2.7.4正常，在github上官方有说明，不低于2.5.7，并且低于2.8.0 解决方法： 更换ansible版本，如果严格执行上述步骤，ansible版本应该是正确的，不会出现此问题  部署停留在Verify that the console is running

1.  TASK \[openshift\_web\_console : Verify that the console is running] _**\***_

    Thursday 30 May 2019  14:04:12 +0800 (0:00:00.109)       0:04:22.223 **\*\***

    1.  Hosts:    origin311.localpd.com

        Play:     OpenShift Metrics

        Task:     openshift\_metrics : fail

        Message:  'keytool' is unavailable. Please install java-1.8.0-openjdk-headless on the control node

        Failure summary:
2.  Hosts:    origin311.localpd.com

    Play:     OpenShift Metrics

    Task:     generate htpasswd file for hawkular metrics

    Message:  This module requires the passlib Python library

解决方法： 因为装metrics需要 yum install java-1.8.0-openjdk-headless python-passlib
